ISDN4Linux: Eicon Diva
and
, how?
Thu Mar 10 19:41:07 CET 2005
Copied from http://www.wurtel.cistron.nl/cards/diva.html
Eicon.Diehl Diva
The Diva 2.0 and 2.01 ISA and PCI
are supported.
NOTE! The "PRO" cards are not
supported. Those are active cards (with a processor) and no
information on programming them is available.
Here is a Diva 2.0 ISA card ("PRO" is printed on the
PCB, but apparently this is a non-PRO):
and a Diva 2.01 ISA card:
Configuration:
Diva ISA |
type=11 protocol=2 irq=X io=0xXXX |
irq and io according to isapnp setup |
Diva PCI |
type=11 protocol=2 |
don't supply an irq or io, this is how the driver can see
that a PCI card is to be used |
© 1999,2001 Paul Slootman
May be used, copied and distributed freely, but my name, this copyright
text, and the URL http://www.wurtel.cistron.nl/cards/diva.html must be
kept intact. See it as a sort of GPL. Exception: Teles may only use
this after express written or PGP/GPG signed permission.
Please send any changes and/or additions to me directly so that I can
integrate them into my original document (if they are worthy).